How to improve the power generation of solar street lamp battery

At present, solar street lamps have been popularized in our life. Solar street lamps can be seen everywhere. Solar street lamps are installed in parks, roads, factories, communities, scenic spots, etc. even in most rural areas. We believe that we have understood its many advantages.

Solar street lamp is a fully automatic integrated working mode, which does not need manual control, and the power source depends on solar street lamp battery panel. During the day, solar street lamp panels absorb the solar radiation on the surface, convert the light energy into electrical energy and store it in the battery, which requires high temperature and weather. Therefore, when the temperature is low, the working efficiency will also be reduced. How to improve the power generation of the battery board at low temperature mainly has the following three methods.

Keep the surface of the battery board clean


If there is snow cover on the surface of the solar street lamp battery panel, the snow should be cleaned timely, because when the snow covers the solar street lamp battery panel, the solar street lamp battery panel can not smoothly absorb the solar radiation, without the support of light energy, the solar street lamp battery panel can not work. After the snow falls, the solar street lamp battery can generate electricity at low temperature.

Large angle installation

Large angle installation of solar street lamp battery panel can effectively avoid the rapid accumulation of snow, reduce the speed and thickness of snow accumulation, and avoid frequent manual cleaning. Of course, the so-called large angle installation is only a moderate increase of the installation angle of the solar street lamp battery under the condition that it does not affect the solar energy receiving sunlight.

Pay attention to the installation distance

When installing the solar street lamp battery board, try to keep the battery board far away from the houses with eaves or the buildings with shelter, to avoid the snow on the top of the surrounding buildings falling on the battery board, and the bottom of the solar street lamp battery board slowly accumulates, so as to block most of the battery board surface and affect the light energy reception of the battery board.