Stacked Home Energy Storage System 10KWH Off Grid Inverter Battery 48V
|Brand Name||JHOTA||AC Output Voltage Waveform||Pure Sine Wave|
|Battery Type||LiFePO4||Controller Type||MPPT|
|Keywords||Home Energy Storage Battery||BMS||Built-in BMS Protection|
Stacked Home Energy Storage System,
Home Energy Storage System 48V,
10KWH Off Grid Inverter Battery
Stacked Home Energy Storage System off-grid inverter 10KWH Battery 48V
1. Warrenty: 3 Years
2. OEM/ODM: Accepatable
3. AC Rated Output Power: 5KW
4. Battery Nominal Voltage: 48V
5. Battery Norminal Capacity: 200ah
6. Application: Backup Power for home and commercial solar energy stystem
This is a new generation of household energy storage system with two input specifications of 220V and 110V, which can meet the diverse needs of global users. The modular design includes power modules and battery expansion modules, so it can be easily combined into a system of any capacity required by the user.
Stackability: A single battery may not be able to power your entire home, so you need to prioritize essentials like lights, sockets, air conditioners, sewage pumps, and more. However, if you want to run everything in your home, some systems allow you to stack or piggyback multiple units to achieve the level of backup you need.
The display can show Battery Voltage+Power percentage+temperature. Disadvantage: The power percentage calculate by voltage, because it is the most easy way to calculate, it is not accurate, just for reference.
|Rated Capacity||Typical 200Ah|
|Charging Mode||C.C / C.V.|
|Voltage at end of Discharge||37.5V|
|Rated Charge Current||≤60A|
|Maximum Continuous Charge Current||≤80A|
|Rated Discharge Current||≤200A|
|Maximum Continuous Discharge Current||≤200A|
|Overcharge Voltage||3.65±0.05V (Adjustable)|
|Over Discharge Cut Off Voltage||2.5±0.01V (Adjustable)|
|Over Current||Discharge overcurrent value: ≧205A|
|Short Circuit||Detection condition|
|Operation Temperature Range||Charge: 0~55℃|
|Storage Temperature Range||Less than 7 day : -20~65℃|
|Maximum PV Open-circuit Voltage||500vdc|
|PV Working Voltage Range||120-500Vdc|
|MPPT Voltage Range||120-450Vdc|
|Maximum PV Input Current||18A|
|Maximum PV Input Power||5200W|
|Maximum PV Charging Current||80A|
|AC Input (generator / grid)|
|Mains Maximum Charging Current||40A|
|Rated Input Voltage||110/120Vac|
|Input Voltage Range||(90Vac~140Vac)±2%|
|Frequency||50Hz/ 60Hz (Automatic Detection)|
|Mains Charging Efficiency||>95%|
|Switch Time (bypass and inverter)||10ms(Typical Value)|
|Maximum Bypass Overload Current||63A|
|Output Voltage Waveform||Pure Sine Wave|
|Rated Output Voltage||120 (100/105/110Vac)|
|Rated Output Power||5000 (4100/4300/4500VA)|
|Rated Output Power||5000 (4100/4300/4500W)|
|On-load Motor Capacity||4HP|
|Output Frequency Range (Hz)||50Hz土0.3Hz/60Hz±0.3Hz|
|No-load Loss||Non Energy-saving Mode: ≤50W Energy-saving Mode:≤25W (Manual Setup)|
|Humidity Range||5% to 95%(Conformal Coating Protection)|
|Communication mode||Working voltage, working current, remaining capacity|
Q1. Can we put different LiFePO4 battery pack in parallel or series by ourself?
R1: Yes. The battery can be put in parallel or series by customers. But there are few tips we need to pay attention;
1> Make sure the voltage of each battery are same before put inparallel. If they are not same, charge them to the same rate.
2> Don't not put discharged battery and undischarged battery in parallel. This may reduce the capacity of the whole battery pack.
3> Advise us the target capacity of the whole pack if you would like to put them in series. We will choose the suitable BMS for each battery.
4> If you are not professional in parallel and series batteries, please don't handle the battery by yourself.
It may cause danger and hurt the cycle life of battery.
Q2. Can we put different LiFePO4 battery pack in series by ourself?
R2: You can buy big voltage directly from us. We suggest do not out them in series by yourself, it will hurt the cycle life of the
Q3. Does your battery pack include BMS? Can we use it for car?
R3: Yes, our battery pack include BMS, you can use it for low speed car only or aux. power for standard car. Do not use it for
standard car directly, that will need more complex design BMS for the pack.
Q4. What is your warranty?
R4: We offer 3 years warranty for most of our battery pack. we ensure at least 3000 cycle life for the LiFePO4 battery pack, which
means, after 3000@80% DOD, there will still around 60% capacityt left. You can use it for at least 5 years for normal 1 time
charge and discharge everyday.