UN38.3 3.2v 100ah Prismatic LiFePO4 Lithium Battery For Ebike
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Brand Name||JHOTA||Anode Material||LFP|
|Discharge Rate||3C||Charging Ratio||1C|
|Warranty||3 Years||Life Cycle||3000 Times|
LiFePO4 Lithium Battery For Ebike,
Ebike 3.2v 100ah LiFePO4 Battery,
UN38.3 Prismatic LiFePO4 Battery
3.2v 100ah Prismatic Lifepo4 Battery For Solar Storage System Electric Vehicles
1.Develop customized BMS for your project
2.Use high-quality battery cell, with strictly QC control
3.All safety testings carries on in incoming materials and outgoing goods
4.100% one by one testing and again spot-testing from OQC before shipping out
5.Flexible for all projects,no high minimum order quali-ty requests
6.Support drop shipping all over the world
This is a single prismatic 3.2V lifepo4 battery with a capacity of 100Ah.
The battery can provide 200A continuous discharge. It's best choose for variety of electric vehicles (two-wheelers, tricycles) and energy storage power sources (portable power station, household energy storage , energy storage power supply for communication station, and solar street light).
LiFePO4 batteries have a low discharge rate and long service life, with an average life expectancy of about 5 to 10 years. LIFECYCLES (BATTERY LIFESPAN) Up to 85% capacity for 3,000 cycles in recommended conditions- 8,000 times(40% dod)LiFePO4
|Standard charge /discharge current||50Ah/-50Ah|
|Nominal voltage||3.2V (0.5C)|
|Charge Ending voltage||3.65V|
|Discharge ending voltage||2.5V (〉0C),2.0V(<0C)|
|Max. charge limited current at room temperature (notfor cycle)||100A-1h(Continuous) / 300A(50%SOC,10s)|
|Max. discharge limited current at room temperature ( not for cycle)||15 0A-3 8min(Continuous) / 300A(5 0%SOC, 10s)|
|Charge temperature range||0 〜55C|
|Discharge temperature range||-20 〜+60 C|
|UL1642||UL Standard for Safety for Lithium Batteries|
|UN38.3||UN Transportation Test|
|IEC 62619:2017||Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications|
|IEC61960||Secondary lithium cells and batteries for portable applications|
|GB/T31484-2015||Cycle life requirements and test methods of power batteries for electric vehicles|
|GB/T31486-2015||Electrical performance requirements and test methods for traction batteries for electric vehicles|
|GB 38031-2020||Safety requirements for power batteries for electric vehicles|
1.Do not give cell impact or fling it.
2.Do not put Battery into microwave oven or high pressure container.
3.Do not touch a leaked directly.
4.Do not throw the Battery into fire or heat it.
5.Do not subject the to strong mechanical shocks.
6.Do not short circuit, over-charge or over-discharge the battery.